Hewlett-Packard DL185 Manual

A SERVICE OF

next previous

Contents 55

CAUTION: The memory slots are structured to ensure proper installation. If you insert a memory

module but it does not fit easily into the slot, you may have inserted it incorrectly. Double-check the

orientation of the module and reinsert. If the holding clips do not close, the module is not inserted

correctly.

PCI Expansion Cards

System Board PCI Expansion Slots

There are two PCI expansion slots on the system board.

Figure 41 System board PCI expansion slots

Item Component

Designator

Component Function

1 J19 PCI slot Supports a PCIe Riser Card

2 J33 PCI slot Supports a PCIe Riser Card

PCI Riser card Expansion Slots

The two PCI Express riser cards attached to the PCI cage convert the functionality of the system board

expansion slots to the slots positioned at a 90° angle from the system board.

NOTE: Users have the option to replace the Dual Slot PCI Express riser cards in Slot 2 with a PCI-X

model using the PCI-X riser card option kit. This will allow support for PCI-X devices.