A SERVICE OF

logo

Open as PDF
next previous
48
cleaning the print cradle
If you use the dual-cartridge printing option after printing with only one
cartridge, you may need to clean the back plate of the unused compartment.
To clean the print cradle:
1.
Dip the end of a clean cotton swab into the distilled water and remove
any excess water.
2.
Wipe the compartment’s back plate.
Repeat this process until no ink residue appears on a clean swab.
3.
Wipe the underside of the print cartridge cradle walls.
Repeat this process until no ink residue appears on a clean swab.
1. print cartridge cradle 2. right compartment back plate 3. cradle wall
%ROWBZLQGRZVERRN3DJH7XHVGD\$SULO30