A SERVICE OF

logo

KK-XXX-03_INST_10-07
14
Position
Driver
-
side Ceiling
section to
mate with Bench/Wall assembly. Pre-
drill 5/32” holes into Ceiling, using
Bench/Wall assembly holes as a guide.
Item #7 to #1
3” inches
Top Passenger-Side rear
Approximately 3”inches
Top Driver-Side rear
Item #6
With unit positioned according to measurements on previous page, pre-
drill and attach a #10 x 1” sheet metal screw to hold the rear Bulkhead
in
place while assembling the remainder of the unit.
Item #6
Item #6