Technical information details
The technical information screen displays the hardware and software information
of the receiver. This information may be required by the service agent or service
call operator.
1 Press » «, select »SETUP« and press »OK«.
2 Select »TECHNICAL INFORMATION« and press »OK«.
Electricity consumption
The Receiver/Player will always switch to standby when you press the » « key,
but will still use energy running the clock and other functions of the Receiver/
Player. To minimise this energy drain, if you press and hold the » « key, the
Receiver/Player will switch off all functions. In this mode the Receiver/Player only
uses a tiny amount of energy, but it will take a little longer to switch on. It will also
interrupt the aerial signal making analogue TV viewing or recording
impossible. If you don’t press a key on the handset or the Receiver/Player within
24 hours, then the unit will automatically switch to this low power standby mode.
Notes on simultaneous operation
●
The Receiver/Player will always switch on in TV mode. To switch to Disc
mode press » «, » « or »!«
●
The SVHS output will always provide a signal in TV mode, but must be
correctly set-up for Disc mode. (See “Selecting the video output socket” in
the Disc mode section of the user manual.
●
The aspect ratio (4:3 or 16:9) of the signal is stored for TV mode and Disc
mode separately so the settings must be adjusted accordingly.
●
The TV program reminder will occur in TV mode or Disc Mode. If you choose
to watch your chosen TV program when in Disc Mode, the Receiver/Player
will automatically switch to TV Mode and Stop Disc playback. If you choose
cancel the Disc playback will resume.
●
When a timer event is set, the 2nd infra red controller is disabled to prevent
interruption.
Optional RF External Infrared Receiver kit
1 Connect the receiver adapter into the aerial socket of your 2nd TV and then
connect the aerial extension lead from the »RF Out2« socket on the
Receiver/Player to the adapter.
2 Place the Infrared Receiver on top of the TV or somewhere in view.
3 Follow the steps in the Advanced setup section of this book to configure
the Receiver/Player to work with the 2nd handset.
19
OTHER INFORMATION
TV MODE
