FORWARD-FACING INSTALLATION WITH LATCH
14
1
7
6
5
4
3
2
LATCH belt must be routed through
opening in child restraint for
forward-facing
(see page 29, fig. e
Belt must lay flat and not be twisted.
Adjust car seat to upright position (see fig. a
and page 25, fig. g3ECURERECLINE
STANDINTO5PRIGHT0OSITIONBYPUSHINGTABS
INTOLOCKPOSITION
Place
forward-facingONVEHICLESEATEQUIPPED
with
LATCH anchors.
For ease of installation, extend
LATCH belt
to its maximum length.
(OOKCONNECTORSTOVEHICLELOWERANCHORS
(fig. b). Pull connectors to be sure they are
securely attached (fig. c).
3LIDECHILDRESTRAINTBACKUNTILTHECHILDRESTRAINT
ISINCONTACTWITHTHEVEHICLESEATBACK
0RESSDOWNlRMLYINCENTEROFCHILDRESTRAINTTO
COMPRESSVEHICLESEATCUSHIONWHILETIGHTENING
LATCH belt by pulling adjustment belt.
5SEYOURKNEETOPRESSDOWNINCENTEROF
child restraint (fig. d).
0ULLFRONTTOBACKANDLEFTTORIGHTATBELTPATH
TOCHECKFORSECUREINSTALLATION(fig. e)4HE
CHILDRESTRAINTSHOULDNOTMOVESIDETOSIDEOR
FORWARDMORETHANINCHCM
#HECKTHATTHELOWERANCHORAGEBELTSTAYS
tight and does not slip from the tightened
position. If it does not stay tight, try another
SEATINGPOSITIONORCONTACT#USTOMER3ERVICE
!TTACHTETHERSTRAPHOOK(A) to anchor
hardware (B) and tighten adjustment belt to
REMOVEANYSLACK(fig. f).
Belt must lay flat and not be twisted.
0ERFORMTHISTESTEVERYTIMEYOUDRIVEWITHYOUR
child.
8
