Screen functions.
Consumer Support
Troubleshooting Tips
Operating Instructions
Safety Instructions
Installation
Instructions
SYSTEM
Select the SYSTEM button to have access to:
■
■ DOOR ALARM
■
■ BUTTON TONES
■
■ ENERGY SAVER
■
■ COOLING SYSTEM
■
■ TIME
■
■ UNITS (ENGLISH or METRIC)
DOOR ALARM
There is a check mark beside the button if the DOOR ALARM is ON
(default). To turn it OFF, select the DOOR ALARM button (check will be
gone). The DOOR ALARM will sound if the refrigerator door is open longer
than 3 minutes. The DOOR OPEN alarm screen will be displayed and
a beeper will sound in 1-minute intervals until the door is closed or
the SILENCE button is selected.
BUTTON TONES
Press the BUTTON TONES button to control the sound of the LCD buttons.
When button sound is ON (default), the beeper sounds a tone each time a
button is pressed per audio specifications. To turn it off, select the BUTTON
TONES button (check will be gone).
ENERGY SAVER
This refrigerator is shipped with the ENERGY SAVER feature ON (check).
Over time, moisture can form on the front surface of the refrigerator
cabinet. If moisture does appear on the front surface of the refrigerator
cabinet, turn OFF the ENERGY SAVER by pressing the button (check will
be gone).
COOLING SYSTEM
This feature turns off the cooling system in the fresh food and freezer
compartments without shutting off the electricity to the refrigerator.
On the SYSTEM screen, select the COOLING SYSTEM button.
To turn COOLING SYSTEM ON or OFF, select COOLING SYSTEM
from the SYSTEM screen.
SET TIME
To set the clock, select the SET TIME button from the SYSTEM screen.
To change the hours and minutes, use the UP and DOWN arrow keys
above and below the numbers. To change from AM to PM, select the
corresponding pad. Select SAVE or CANCEL. You can change the time
to a 24-hour clock by selecting the 24 HR button. Change the hours
and minutes using the UP and DOWN arrow keys above and below
the numbers. Select SAVE or CANCEL.
SETTINGS (cont.)
