
24
%:7=+4.;177<260%28;
$*>.<25.*6-576.A#.>2.?<1.,1*:<;76<1./7447?2608*0.;
7:>2;2<==96.;02@0<:)7=5*A67<6..-<7,*44/7:;.:>2,.
$%# ! $<@@6/92.B@2@ *5.A'<<
?F2?@5.82@<? Some shaking/noise is normal. • Move dryer to an even floor space, or adjust leveling legs
:.82@;<6@2 Dryer may be sitting unevenly as necessary until even.
9<A52@A.82A<<9<;4 Improper or obstructed ducting • Check the Installation Instructions to make sure
A<1?F the dryer venting is correct.
• Make sure ducting is clean, free of kinks and unobstructed.
• Check to see if outside wall damper operates easily.
Improper sorting • Separate heavy items from lightweight items (generally,
a well-sorted washer load is a well-sorted dryer load).
Large loads of heavy fabrics • Large, heavy fabrics contain more moisture and take
(like beach towels) longer to dry. Separate large, heavy fabrics into smaller
loads to speed drying time.
Controls improperly set • Match control settings to the load you are drying.
Lint filter is full • Clean lint filter before every load.
Blown fuses or tripped circuit • Replace fuses or reset circuit breakers. Since most
breaker dryers use 2 fuses/breakers, make sure both are
operating.
Overloading/combining loads • Do not put more than one washer load in the dryer at
a time.
Underloading • If you are drying only one or two items, add a few items
to ensure proper tumbling.
'52%,1?F;2@@92C29 Load consists of a mixture • When combining heavy and light fabrics in a load,
D.@05<@2;/BA9<.16@ of heavy and light fabrics choose !#%%,.
@A6991.:=
Exhaust system is blocked • Inspect and clean exhaust system.
<;A?<9=.1@;<A Controls accidentally put in • Press &'#$.
?2@=<;16;4 service mode
Controls accidentally put in • Hold the # button for 3 seconds to unlock the dryer.
lock mode
Controls performed an • Reset the in-house breaker.
incorrect operation
?F2?1<2@;MA@A.?A Control panel is “asleep” • This is normal. Press $#*% to activate the control panel.
Dryer is unplugged • Make sure the dryer plug is pushed completely into
the outlet.
Fuse is blown/circuit breaker • Check the building’s fuse/circuit breaker box and
is tripped replace fuse or reset breaker. "#'Electric dryers
use two fuses or breakers.
Dryer was accidentally paused • If the light on the ,&'%' pad is flashing, the
when starting Delay Start dryer is paused. Press &'%' to restart the countdown.
"<;B:/2?@16@=9.F21 Dryer is continuously • This is normal. When the dryer senses a low level of
1B?6;40F092<;9F9645A@ monitoring the amount of moisture in the load, the dryer will display the dry time
moisture in the clothes remaining.
23<?2F<B0.993<?@2?C602H ==96.;02@0<:
<;@B:2?&B==<?A'?<B/92@5<<A6;4'6=@#=2?.A6;4;@A?B0A6<;@&.32AF;@A?B0A6<;@