18
When this function is , during an external call, you may lift the handset to answer a
call immediately without pressing any buttons. To end a call, put the handset back on
the base cradle directly.
1. Press the (5 or 6) button to scroll to the sub-menu.
. Press
button to enter the menu. The screen displays > NO YES.
.
Use the (5 or 6) button to scroll to your selection. NO is the
default setting.
. Press the button to conrm.
Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.
1. Press the (5 or 6) button to scroll to the
sub-menu.
. Press the
button to enter the menu. The screen displays YES4NO.
The default setting is NO.
. Use the
(5 or 6) button to scroll to or .
. If you select
, press the button. The screen displays HOLD
BASE FIND FOR 5 SECONDS, THEN PRESS MENU OK KEY. (Your handset should be
held near the base during registration process.)
5. Press and hold the
button on the base unit, the charge/in use indicator
ashes. Press the handset button. The screen displays
REGISTERING. The handset screen displays REGISTERED. You may now rename
your handset. (Refer to Step & of Handset Name Section)
