20 Installation
Turning off the system drawer
To turn off the system drawer:
1 Close all programs.
2 If necessary, issue a “flush” command to write the contents of any caches
or buffers to disk.
3 If necessary, issue a command to exit or quit the operating system.
4 Press the on/off switch on the system drawer.
5 Turn off any other devices connected to the system drawer.
Securing the system drawer in the
cabinet
To secure the system drawer:
1 Close the back door of the system cabinet, then lock it if necessary.
2 Push the system drawer all the way back into the cabinet until the front
panel presses against the front vertical mounting rails.
3 Secure the system drawer to the front vertical mounting rails using four
screws from the accessory kit.
4 Close the front cabinet door, then lock it if necessary.
8506163.book Page 20 Wednesday, May 10, 2000 11:40 AM
