34
Reference
Using the Routes Menu
To Select a Route to start from a List of Saved Routes:
1. Press the ROUTE key to view the Routes Menu.
2. Select List and press ENTER. The Select a Route to Start window appears.
3. Use the ROCKER KEYPAD to select a saved route from the list.
4. Press ENTER. The unit is now ready to navigate the route.
To Recalculate a Route:
1. Press the ROUTE key to view the Routes Menu.
2. Select Recalculate and press ENTER.
3. The Route Preference Window appears (unless disabled).
4. From the Route Preference window select Faster Time, Shorter Distance, or Off Road (or Don’t Ask
Again). See page 43 for a description of these four options.
5. Press ENTER. The Thumbnail Route Map appears in the lower left-hand corner of the Map Page. The
unit is now ready to navigate the route.
To Stop a Route:
1. Press the ROUTE key to view the Routes Menu.
2. Select Stop and press ENTER. The current route becomes inactive.
To Save a Route:
1. Press the ROUTE key to view the Routes Menu.
2. Select Save and press ENTER. The Route Saved window appears, showing the active route.
3. Press ENTER (OK button) to confi rm the name and save the route (the name can be edited here).
There can be up to 50 saved routes.
If you want faster time instead of shortest distance, you
can recalculate the route at any time.
To save a route, select ‘Save’ from the Routes menu
and press the OK button on the Route Saved window.
new ref manual.indd 03/16/01, 1:44 PM34
