28 GPSMAP 5000 Series Owner’s Manual
Where To?
Where
to?
To create a route in another location:
1. From the Home screen, touch Information > User Data > Routes > New Route.
2. Complete one of the following actions to select the starting point of the route:
Touch Use Chart and touch the screen at the location of the rst waypoint on the route. The
waypoint is indicated by the cursor .
Touch Use Waypoint List and select the rst waypoint on the route.
3. Touch Add Turn to mark the starting point of the route.
4. Touch the location of the rst turn and then touch Add Turn. Repeat until the route is complete.
5. Touch Done.
To create a route using Automatic Guidance:
Automatic Guidance is available with a preprogrammed BlueChart g2 Vision SD card.
1. From the Navigation chart or the Where To? menu, touch your destination.
2. Touch Navigate To > Guide To. Your route is calculated.
NOTE: To change the automatic guidance path to a route, touch the end of the path and then touch
Navigate To > Route To. The automatic guidance path stays on the screen, allowing you to trace it
while creating a route.
•
•
