Trip Computer Page
The Trip Computer Page shows important data while navigating a
route in Automotive Mode. It indicates your current speed and other
helpful data about your trip, such as average speed and moving time.
Trip Computer Page
Reset the Trip Computer before beginning a trip. If you make
frequent stops, leave the GPSMAP 276C turned on in order to
receive satellites. This allows the unit to accurately measure elapsed
time during the trip.
Trip Computer Page Options Menu
The following options are available from the Trip Computer options
menu. Some options are only available if you have changed the page
layout. Press MENU to open the options menu. Highlight an option,
and press ENTER.
Trip Computer Page Options Menu
Set Up Page Layout—allows you to choose the layout and number
of data fields. You can change the layout of the Trip Computer Page
to the Dashboard layout while still in Automotive Mode. Then you
change the data fields on the Dashboard while in Automotive Mode.
Select the Reset options to reset the maximum speed, the odometer,
everything but the max speed and odometer, or reset everything in
the trip computer.
GPSMAP 276C Owner’s Manual 63
AUTOMOTIVE MODE PAGES AND FEATURES > TRIP COMPUTER PAGE
