4-9
OTHER menu
Keying sequence: [MENU] [0] [0] [0] [0] [6] [6] [0] [0] [9] [9]
ECHO AVG: Echo averaging can be turned on without gyrocompass connection.
TX/ANT: Set to ROTATE in normal use. STOP enables transmission state without scan-
ner rotation.
ON TIME, TX TIME: Shows number of hours the radar has been turned on and transmit-
ted, respectively. Value can be changed.
OUTPUT ALARM: See OUTPUT ALM menu.
OUTPUT ALM menu
Keying sequence: [MENU] [0] [0] [0] [0] [6] [6] [0] [0] [9] [9] [6] [6]
Selects which alarm signal(s) to output; timer, target alarm, ATA alarm, plotter alarm.
OS & ANT menu
Keying sequence: [MENU] [0] [0] [0] [0] [6] [6] [0] [0] [7]
LENGTH: Enter ship's length.
WIDTH: Enter ship's width.
FORE RADAR: Enter distance from radar scanner to fore.
PORT RADAR: Enter distance from radar scanner to port.
FORE RADAR: Enter distance from GPS antenna to fore.
PORT RADAR: Enter distance from GPS antenna to port.
Note: When the radar antenna distances are entered the same distances are copied to
the distances for the GPS antenna. Change the GPS antenna distances to actual dis-
tances.
