Operator control
18 ENGLISH
OSD settings
S Press the [MENU] button to open the main menu.
S With the button [ Y]or[B] select the <Setup> menu
and press the button [
"].
S Select <OSD> with the button [Y]or[B] and press
the button [
"].
Time Out
Under the menu option <Time Out> you can alter the
display duration (time after last actuation up to mask
out) of the OSD menu.
S Select <Time Out> [Y]/[B].
S You can select one of the following possibilities:
OFF; 5, 10, 15, 20, 25, and 30 seconds [
A]/["].
Transparency
The function <Transparency> offers the possibility of
changing the transparency of the OSD menu.
S Select <Transparency> [Y]/[B].
S You canswitchoffthetransparencyorchange itwit-
hintherange1to10[
A]/["].
The value 10 is the maximum transparency of the
OSD menu.
Show Logo
In the menu option <Show Logo> the logo displayed
upon switching on or in the absence of a signal can be
switched on or off.
S Select <Show Logo> [Y]/[B].
S Select On or Off [A]/["].
Reset to factory defaults
You have the option of resetting all changes made in
the OSD menu back to the original default setting.
S Select <Reset to factory defaults> [Y]/[B].
S Press the button ["] to reset to the default settings.
The LCD/plasma TV switches automatically to
standby mode.
Setting the language
The first time your LCD/plasma TV is installed the
language for the OSD menu is set in accordance with
your selection.
You c an change the language setting in the menu
option <Language>.
S Select <Language> [Y]/[B].
S Select the language [A]/["].
The followinglanguages can be selected:German,
English, French, Spanish, Italian, Dutch, Danish,
Swedish, Norwegian, Finnish, Portuguese and Po-
lish.
TTX Setup
Selecta c haracterset forteletextmode: WEST, EAST,
RUSSIAN or ARABIC.
Thisisgovernedby thelanguage settingof theteletext
used. Please use the option WEST for west Europe!
S To close the menu press the red button (M).
Downloaded From TV-Manual.com Manuals
