102 SPARC Enterprise T5440 Server Service Manual • June 2011
Servicing CMP/Memory Modules
This topic includes the following:
■ “CMP/Memory Modules Overview” on page 102
■ “Remove a CMP/Memory Module” on page 104
■ “Install a CMP/Memory Module” on page 105
■ “Add a CMP/Memory Module” on page 105
■ “CMP and Memory Module Device Identifiers” on page 107
■ “Supported CMP/Memory Module Configurations” on page 107
CMP/Memory Modules Overview
Up to four CMP/memory modules can be installed in the system. Each CMP module
is paired with a memory module. CMP modules and memory modules are keyed
uniquely to prevent incorrect insertion into the wrong type of slot.
A faulty CMP or memory module is indicated with an alluminated fault LED. An
alluminated module LED also might indicate a faulty FB-DIMM on that module.
