Operator control
28 ENGLISH
VPos.
S Sets the vertical picture position [A]/["].
VSize
S Sets the vertical picture size [A]/["].
HPos.
S Sets the horizontal picture position [A]/["].
HSize
S Sets the horizontal picture size [A]/["].
Phase
S Eliminate flickering and distortions.
S To close the menu press the red button.
Settings for PC (DVI)
S Press the [MENU] button to open the main menu.
S With the button [Y]or[B] select the <Display>
menu and press the button [
"].
S Select <Overscan> [Y]/[B] and press the button
[
"].
Overscan
S Switch <Overscan> on and off [A]/["]
As soon as the optionOverscan is switched on, the
edgeofthepictureiscutby approx.10%.Anyfaults
on the edge of the picture are eliminated or made
non-visible by this cutting facility.
S To close the menu press the red button.
Select inputs
For the selection of an input use the selection menu
<Inputs>.
S Press the button [SOURCE] or [F4] to open the se -
lection menu <Inputs>.
S Select input [Y]/[B] and then pressthe red button.
Downloaded From TV-Manual.com Manuals
