E-31
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
Selecting the settings of Video/S-video Input terminal
You can use this option to select the color format appropriate for the input signal.
Each time you press E or F, one of the available modes appears in the following sequence:
<
Auto1 <Auto2<
NTSC
<PAL<
SECAM
<
PAL60
<
N-PAL <M-PAL<
4.43NTSC
<
[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.
Press
< to store.
Selecting the settings of D-SUB Input terminal
You can use this option to select the signal system it will receive to D-SUB Input terminal.
(1) Select D-SUB Input and press <.
D-SUB Input screen appears.
(2) Select the signal system to receive.
Each time you press E or F, one of the available choices appears in the following sequence:
< RGB-PC < Decoder <
[RGB-PC]: For using RGB of PC
[Decoder]: For using digital broadcast tuner
(3) Press
< to store.
SETTING THE INPUT TERMINALS
Input Terminal Settings Screen
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
7459_E.book 31 ページ ２００６年４月３０日 日曜日 午前１１時３６分
