Driver Manual
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408) 262-6611 fax: (408) 262-9042
Visit our website: www.sierramonitor.com E-mail: sierra@sierramonitor.com
Page 32
6.1.8 Map Descriptor: Example 5 - Using a special / diagnostic command.
Map_Descriptor_Name, Scan_Interval, Data_Array_Name , Data_Array_Offset, Function, node_name, Address, Length, DA_Func,
A1, 1.0s, UNUSED_ARRAY, 0 , wrb , No_node, 0, 1 , All-Listen,
is sent only
once. If you
need to do this
change this to a
wrbc.
be associated with
not be used. It
may be any data
type.
Must connect this map descriptor to a node whose node_id is
zero. For example.
Nodes
Node_Name, Node_ID, Protocol, Port
Unit1, 0, Daire, R1
/ dianostic
command. It
causes a one
byte message to
be sent.
