XTP T UWP 202 Wallplate Transmitter • XTP System Configuration Software 33
Device Information panel
The Device Information panel on the right side of the software screen displays device
information and settings.
General Information section
1
Model — Displays the device model.
2
Firmware version — Displays the full firmware
version.
Signal Information section
3
Selected input — Displays the input number of
the currently selected input (1 = VGA input and
2 = HDMI input).
4
Auto-input switching — Displays the On or Off
status of auto switch mode.
5
Signal present — Displays the signal presence
of both inputs.
6
HDCP — Displays the HDCP status of input 2.
Audio Information section
7
Selected audio input — Displays the format of
the currently selected audio input.
8
Analog audio gain — Displays the analog audio gain in dB.
