A SERVICE OF

logo

Open as PDF
next previous
2-24
PoleVault Systems Installation • Installation — Stage 5
Stage Five — Congure the Switcher and the System
1. Congure the switcher — MLS Switcher
Conguration program
a. Run the DVD (or download) and install on a PC or laptop
the Extron MediaLink Switcher Conguration program.
b. Ensure the PC and the MLC 104 IP Plus are connected to
the LAN.
N
If this is not possible, connect a 2.5 mm TRS
configuration cable (part # 70-335-01) to the PC
and to the front panel configuration port of
the MLC 104 IP Plus.
c. Launch the MLS Configuration utility. Select the
connection format (RS-232 or TCP/IP), or select the
emulation mode (see figure
1c
).
N
An offline emulation of the PVS 305SA can aid in
becoming familiar with the PVS 305SA before
configuring an active unit.
d. Once the program is running click on Help, Contents (or
press F1), and follow the instructions.
Stage 5
Items needed to help complete this stage:
• Laptop (or PC) with a network connection
• MLS Conguration program (on supplied DVD or by
download from www.extron.com)
• Global congurator software
• MLC 104 IP Plus User’s Manual
• Projector manufacturer’s user’s manual
• Device driver and/or driver package (download from
www.extron.com)
The MLS Configuration Utility software
1c
Launch the MLS Configuration program
1d
Select “Help, Contents” and follow
instructions
The PVS 305SA emulation mode screen