A SERVICE OF

logo

Operation, cont’d
MVX Plus 128 VGA Matrix Switchers • Operation
3-42
PRELIMINARY
Perform a soft reset of the switcher as follows:
1. Press and hold the rear panel Reset button until the front panel RGBHV and
Audio buttons blink once (events reset), twice (system reset), or three times
(absolute reset) (fi gure 3-70).
I / O
RGBHV AUDIO
I / O
VIDEO AUDIO
I / O
RGBHV AUDIO
RESET
LAN
RESETRESET
RESET
RESETRESET
Press and hold
the Reset button.
Press and hold
the Reset button.
NOTE The Reset button on switchers with matrix sizes of 24 x 12 and above
have a different appearance and do not have a rear panel Reset LED.
Release, then
immediately
press and release again.
Release, then
immediately
press and release again.
3 seconds
Events Reset
IP Settings
Reset
Buttons and Reset LED flash once.
Buttons and Reset LED flash twice.
Buttons and Reset LED flash three times.
6 seconds
Press and hold
the Reset button.
Release, then
immediately
press and release again.
Absolute Reset
9 seconds
1
2
3
Figure 3-70 — Whole switcher and absolute resets
2. Release the Reset button and then immediately press and release the Reset
button again. Nothing happens if the second momentary press does not occur
within 1 second.