![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/d6/9d662dc8-7a86-45cf-ab62-912ef9df5c9c/9d662dc8-7a86-45cf-ab62-912ef9df5c9c-bg18.png)
MMX 42/62 Series Matrix Switchers • Remote Control
Remote Control, cont’d
4-16
MMX 42/62 Series Matrix Switchers • Remote Control
4-17
7
7
Figure 4-13 — Choose Firmware File window
7. Navigate to and select the new firmware file. Click Open.
The Choose Firmware File window closes.
N
When downloaded from the Extron Web site, the firmware
is
placed at C: Program Files\Extron\Firmware\MMX4262.
C
The firmware file must have a .s19 extension. Other
file types can cause the switcher to stop functioning.
8. In the Firmware Loader window, click Begin (figure 4-14).
The Total Progress and Progress status bars show the
progress of the upload. The firmware upload to the
switcher may take several minutes. Once the status bars
have progressed from 0% to 100%, and Status is listed
as Complete, the firmware loader utility resets the switcher.
Figure 4-14 — Firmware Loader screen
9. Click Exit to close the Firmware Loader.
Windows menus
File menu
Save Communications Log ... —
Opens a Save Log window
that allows you to save all SIS
commands from the current
session to a text (*.txt) file.
Print Preview Communications Log ... — Opens a window that
presents a preview of a printed log of all SIS commands
from the current session.
Print Communications Log ... — Prints all SIS commands from
the current session.
Exit — Closes the Universal Switchers Control Program.
View menu
Display — Allows you to select
between horizontal
(figure 4-5) and vertical
(figure 4-15) display of the
input and output selection
window. These selections
are also available via the tool bar's Horizontal button ( )
and Vertical button ( ).
Figure 4-15 — Vertical display
Features View — Allows you to select which field, Unit Info, or
A/V Mute, Gain/Attenuation to display as the default
field in the top right of the Universal Switcher Control
Program window.
Communications Log View — Opens the communications log if
it is not already open. This selection is also available via
the tool bar's Communications Log View button (
).
Command Prompt ... — Opens an MS-DOS window.