C-12
Command Summary
Vertical motion
Form feed FF
Set page length in lines ESC C
n
Set page length in inches ESC C 0
n
Set skip over perforation ESC N
n
Cancel skip over perforation ESC O
Line feed LF
Select 1/8-inch line spacing ESC 0
Select 7/72-inch line spacing ESC 1
Select 1/6-inch line spacing ESC 2
Select n/216-inch line spacing ESC 3
n
Advance paper n/216-inch ESC J
n
Reverse paper n/216-inch ESC j
n
Tab vertically VT
Set vertical tabs ESC B
nn
Note:
Your printer will not print characters beyond one page length (set with the ESC C
or ESC C0 commands), while an FX printer might print them.
Horizontal motion
Set absolute horizontal print position ESC $
n1 n2
Set relative horizontal print position ESC\
n1 n2
Set left margin ESC l
n
Set right margin ESC Q
n
Tab horizontally HT
Set horizontal tabs ESC D
nn
Overall printing style
Select letter quality or draft ESC x
n
Note:
The print quality and speed cannot be changed even if you send the ESC x command.
Select typeface family ESC k
n
Master select ESC !
n
