A SERVICE OF

logo

GL815E Endura Motherboard Product Manual
Page 27 of 51
3.7.2 I/O Shield
An I/O shield is available for the GL8"5E when used in a standard ATX chassis and is illustrated
below. The shield press-fits into the chassis shield aperture. The shield illustrated includes the RJ45
Ethernet aperture but not the optional flat panel display connector aperture.
0.280
(0.472)
(0.568)
(0.465)
1.189
5.768
5.276
4.783
3.215
2.071
1.799
0.000
0.000
(0.450)
0.442
0.063
0.114
0.157
0.591
6.268
6.390
0.787
3.7.3 Fansink
The motherboard can be optionally shipped with a processor fansink, which must have a minimum
air space of 0.2 inches around it to function correctly. This is shown in the drawing below.
0.2 inch Minimum Air Gap
Processor
Fansink
Socket
Max. height with fansink
1.8 inches