11
Ranger/Free Lite S and A heads are designed specically for the Ranger RX battery pack.
The special ashhead bayonet plug with locking ring protects against dust and humidity.
The modelling lamp can be activated for 15 or 30 seconds.
By pressing the switch (-on the rear of the head-) once, the modelling lamp switches off
after 15 seconds, when pressing the switch twice within 2 seconds, the modelling lamp will
switch off after 30 seconds.
To switch off the modelling lamp earlier, (after two seconds) just press the touch button again.
• The maximum modelling lamp power for the pack is 100W / 12V for one connected ashhead
or two 50 W / 12 V for two connected ashheads.
• The standard Elinchrom reector tting with bayonet and breech lock accepts all Elinchrom/Prolinca
accessories manufactured since 1974.
• The Ranger/Free Lite S is a universal ashhead for all general studio and location work.
• The Ranger/Free Lite A head comes with a special, short ash duration ashtube, for action freezing
photography (One A head 1/2300 s two A heads 1/4310 s, t 0.5 at full power).
• Flashheads are tted with 3.5 m heavy duty cable.
• The Ranger/Free Lite ashheads cannot be insulated against humidity and dust.
• Only use them with suitable protection if wet or similary dangerous circumstances.
• Do not use near ammable/explosive material (min. 1m distance of any object)
• Do not open the unit. In the event of damage or apparent failure, contact a
repair service or any Elinca agent or email: elinca@elinca.ch
• For your safety, use only elinchrom ashhead.
Modelling lamp
Art. Nr: 23044
Modelling lamp switch
Lamp fuse 5AF
!
Safety Precautions
Ranger/Free Lite S and A Flashheads
