Eiki International LC-XA20 Manual

A SERVICE OF

next previous

Setting

47

Remote control

This projector provides two different remote control

codes: the factory-set initial code (Code 1) and the

secondary code (Code 2). This switching function

prevents remote control interference when operating

several projectors or video equipment at the same

time.

When operating the projector in "Code 2", both the

projector and the remote control must be switched to

"Code 2".

To change the code for the projector:

Select either "Code 1" or "Code 2" in this Setting Menu.

To change the code for the remote control:

Press and hold both the MENU and IMAGE buttons

together for 5 seconds or more. After changing the

code, make sure the remote control operates properly.

Remote control