D-Link DHS-3224V Switch User’s Guide
119
Trap Receivers
The following menu allows the user to specify management stations that will receive authentication failure
messages or other trap messages from the switch. Up to 4 trap managers may be entered.
Figure7- 40. Trap Receivers Menu
To set up trap receivers, define the following:
Trap Receiving Station
Type in the IP address of the trap recipient, i.e. the IP address of the
management station that will receive traps generated by the switch.
Community String
Type in a string of up to 20 characters used for authentication of users
wanting to receive traps from the switch’s SNMP agent.
Status
Choose Enabled or Disabled for the string. This is used to temporarily
limit the receipt of traps generated by the switch.
User Accounts
Use the User Accounts Control Table to control user privileges.
Figure7- 41. User Accounts Control Table
To add a new user, click on the New button. To modify or delete an existing user, click on the More button for
that user.
