A SERVICE OF

logo

Installing The Palmrest Assembly
1. Align the palmrest assembly with the computer and snap it into place.
2. Replace and tighten the screws to secure the palmrest assembly to the
system board.
3. Connect the following cables to the system board:
LED board
touchpad
bluetooth
contactless smart card reader
Express Card
fingerprint reader
4. Replace and tighten the screws to secure the palmrest assembly to the
computer.
5. Install the
keyboard
.
6. Install the
keyboard trim
.
7. Install the
hard drive
.
8. Install the
ExpressCard
.
9. Install the
base cover
.
10. Install the
optical drive
.
11. Install the
Secure Digital (SD) card
.
12. Install the
battery
.
13. Follow the procedures in
After Working Inside Your Computer
.
45