A SERVICE OF

logo

Installing the ExpressCard Cage
1. Place the ExpressCard cage into its compartment.
2. Tighten the screws to secure the ExpressCard cage to the computer.
3. Install:
a) palmrest
b) display assembly
c) keyboard
d) keyboard trim
e) bluetooth card
f) hard drive
g) base cover
h) battery
4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Connector Port
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
b) base cover
3. Disconnect the power-connector cable from the system board.
4. Remove the screw that secures the power-connector bracket to the computer.
5. Remove the power-connector bracket from the computer.
31