A SERVICE OF

logo

3
The following diagrams represent mechanical clearances (areas that must be kept free of
obstructions). Of particular concern is the roll dome. Whether or not you purchased one
with your unit, there are some clearances to maintain should you wish to add or remove
a roll dome (Diagram #1). Also, the roll dome requires some clearance in order to
operate (Diagram #2).
Diagram #1
CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8
TEL: (519) 751-1800 FAX: (519) 751-1802
www.crownverity.com
Email: info@crownverity.com
Roll Dome Assembly Clearance
Roll domes slide into
pace from the rear
Rear track
20”
Deck
(finished surface)
Keep slide tracks & surfaces
behind them unobstructed at
least 20” behind rear edge.