A SERVICE OF

logo

Installation Instructions WMA1S
13
7. Install one 1/4-20 x 3/4" button head security screw (K) into
hole vacated by removing bolt in Step 6 and into plastic
spacer. (See Figure 26)
8. Repeat Steps 6-7 for remaining three bolts one bolt at a
time.
WARNING: It is important to replace adapter plate bolts
ONE AT A TIME or adapter plate could fall from mount during
installation!
Figure 26
9. Reinstall column according to column installation
instructions.
Plastic spacer
Adapter plate
(K) x 4
7
(one at a time)