Cubix™ 2.0 User Manual (Rev. 5) Page 9 of 13
4. OPERATION
To access the control panel functions, use the four buttons located underneath the display.
Please refer to the Product Overview to see the button locations on the control panel.
<MENU>
Press to find an operation mode or to back out of the current menu
option
<UP> Press to scroll up the list of options or to find a higher value
Press to scroll down the list of options or to find a lower value
Press to activate a menu option or a selected value
DMX Address 512 d__1-d512 Sets the DMX starting address
Auto Programs AUTO Sets Auto Program
Auto Program
Speed
S-- S__1-S100 Selects Auto Program speed (slow to fast)
SNd Sets Sound Active mode
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Cubix™ 2.0 uses up to 7 DMX channels in its 7-channel DMX mode, which defines the
highest configurable address to 506.
If you are not familiar with the DMX protocol, download the DMX Primer from the
CHAUVET® website.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
