Q-Wash 250 User Manual 9 2006-05-17/13:18
OPERATING INSTRUCTIONS
Control Panel
Please be aware that after 12 seconds of no control panel activity the LEDs in the display will turn off.
Press any button to initialize.
On the control panel you can set the DMX address, set the fixture to Master/Slave mode, reset the
fixture and change fixture personality trait.
Control Panel Functions
FUNCTION OPTIONS NOTES
PAN NO/YES Pan Invert
Tilt NO/YES Tilt Invert
Addr A001 DMX Channel Address
rESt YES Fixture reset
COLI NO/YES Linear progression of color wheel (split colors)
RUN
dn.Co.
Pr6.1
Pr6.2
SLAE
Sou.1
Sou.2
DMX-512 Mode
Automatic Program 1 (when mounted upside down)
Automatic Program 2 (when floor positioned)
Slave Mode
Music Program 1 (when mounted upside down)
Music Program 2 (when floor positioned)
LAMP
ON
OFF
Lamp on
Lamp off
VEr 1.X Software version
HEAt Status Too hot to strike or no lamp
LA.Er Status Lamp error
Applying changes to Functions (Quick Instructions)
Unless other wise stated changes in the control panel can be applied in the following manner.
1. Press [MODE] button repeatedly until the display reads the menu function you wish to change as
illustrated in the table above in section “Control Panel Functions”
2. Press the [ENTER] key to confirm the selection
3. Press the [Up] or [Down] button to toggle between the options available for that particular menu
function.
4. Press the [Enter] button to store your selection.
[MODE] Confirms selection
[ENTER] Access to main menu
[Up] Toggle menu items in a forward direction
[Down] Toggle menu items in a reverse direction
