Setting Various Functions
126
Showing / Hiding the
Guide Screen
[Guide]
You can select whether to show or hide the
guide screen which explains operations.
MENU > [System settings] > [Guide]
MENU > [Install settings] > [On screen] >
[Guide]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• [On] is the factory default.
• The guide screen is shown at the following
times.
- Power is turned off by pressing the
POWER button. (P80)
- No input signal can be detected. (P58)
- An invalid button is pressed in the
[BLANK], [FREEZE] or [D.ZOOM]
mode. (P82, P84)
- When the positional lock (P139) is set to
[On] (WX6000 / SX6000)
HDMI Component
Digital PC Analog PC
Off Hides the guide screen.
On Shows the guide screen.
