155
E
Additional
Information
• AV/PHONES is not set to AV in the
menu ( 32).
•AV\ DV OUT (Analog-digital
converter) is not set to OFF in the
menu ( 92).
• The video heads need cleaning
( 150).
• The TV/VIDEO selector on the TV
isn’t set to VIDEO ( 33-35).
• The speaker has been turned off with
the selector dial ( 31).
• Headphones are being used.
? There’s no picture on the TV
screen.
? There’s no picture on the TV
screen, even though the tape is
moving.
? There’s no sound coming from the
speaker during playback.
Memory card operations
Cause and/or what to do about it
• It is not turned the right way
( 102). Turn it the right way and
try inserting again.
• Turn the camcorder's power off and
back on again and remove and
reinsert the card. If the mark
continues to flash, format the
memory card.
• The camcorder is not set to CARD
CAMERA or CARD PLAY (VCR)
( 107, 117) mode.
• The memory card is not inserted
( 102).
• You are using an SD Memory Card and
it is set for erasure prevention. Change
the position of the protect switch.
• The memory card is full. Erase
images ( 121) or insert a new
memory card.
• The power source is not properly
connected, or the battery pack is
exhausted or not properly attached
( 12-15, 147).
• The function cannot be used in that
recording program ( 57).
Problem
? The memory card will not insert.
? The mark flashes red in the
display even though a memory
card has been inserted.
? Nothing happens when I press the
buttons.
