Using an Eye-Fi Card
Check|rig Connection information
You can check the Eye-Fi card's access point SSID, or connection status.
Choose [Connection info].
Press the MENUbutton to choose [Eye-Fi
Settings] from the _1' tab, then press the
@ button.
Press the ,_v buttons to choose
[Connection info], then press the
button.
The connection info screen will appear.
Disabling Eye=Fi Transfer
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
Press the MENUbutton to choose [Eye-Fi
Settings] from the _1' tab, then press the
@ button.
Press the ._.'_ buttons to choose [Eye-Fi
trans.], then press the 4_, buttons to
choose [Disable].
[Eye-Fi Settings] will only appear when an Eye-Fi card is inserted in the camera.
180
