A SERVICE OF

logo

Open as PDF
next previous
253
UsingOptionalAccessories
Alignthe
○
markontheringwiththe
●
markonthecamera,andthenliftthe
ringoff.
3 Attachthebacksectionofthe
conversionlensadapter.
Alignthe
●
markonthebacksectionwith
the
●
markonthecamera,andthenturn
theadapterinthedirectionofthearrows
untilitlocksinplace.
Toremovetheadapter,holddownthe
ringreleasebuttonandturntheadapter
intheoppositedirection.
4 Attachthecontrollertothe
camera.
Attachthecontrolcomponentofthe
macroringlitetothehotshoeontopof
thecamera.
5 Attachtheashunittothe
conversionlensadapter.
Pressthereleasebuttonsonbothsides
ofthemacroringliteinandattachthe
macroringlitetotheconversionlens
adapter.
6 Chooseshootingmode<G>,
<M>,<B>,or<D>.
Flashsettingscanonlybeconguredin
thesemodes.Inothermodes,theash
isadjustedandredautomatically,as
needed.
COPY