Loading and Unloading Film
26
3
Pull the edge of the film leader to
the orange mark on the camera.
• Hold down the film cartridge while
pulling out the film leader.
• If the edge of the film leader goes
beyond the orange mark, rewind
some of the film back into the
cartridge.
4
Close the camera back.
• After checking that the film leader
edge is correctly aligned with the
orange mark, close the camera back.
The film will advance to frame 1
automatically.
After the film ID is imprinted, the
cartridge icon and frame counter
“” will be displayed.
Film ID being imprinted
Right
Wrong
Orange mark
SEC.01 P013-028 (E) 28-01-2003 10:20 Pagina 26
