82
E
Editing
Turning the analog-digital converter on
AV DV OUT•••OFF
VCR SET UP
( 39)
To turn the analog-digital converter on, open the menu and select
VCR SET UP. Then select AV
\\
DV OUT, set it to ON and close the
menu.
Caution:
• For normal use, set AV
\\
DV OUT to OFF through the menu. If it is set to
ON, you cannot input digital signals through the camcorder’s DV terminal.
• If you attempt to perform analog-digital conversion with a cassette inserted to
the camcorder, the converted signals may not be output to the connected digital
video equipment.
• When connecting to a PC equipped with a DV terminal, you may not be able to
transfer converted signals to your PC, depending on the software you are using,
and the specifications of your PC and its settings.
4_ZR40_E(76-91) 2/5/02 17:29 Page 82
