User Command Specifications
9．Details of command GET WB
GET WB
GET WB
GET□WB
?△WB
:WB=<Screen color correction value: ID>
Meaning
Normal
Blackboard
ADJUST Adjust
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The screen color correction can be set by the WB command.
> GET WB or ? WB
< g:WB=GREENBOARD
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
×○
SX60
○○
○○–×
SX6
○○○○○○ ○
SCART None
SX50
○○○○○○–
Mode
Remote Local
Remarks
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Screen color correction inquir
Mode Control Setting Reference
SX6
This inquires about the current screen color correction.
ID
SX60 X600
Response
NORMAL
GREENBOAR
SX50
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
Function
Format
Description
Response
01.00** 01.01** 01.01** 01.01**
○○○○
Command
supported
Example
PAGE 90
