119
Using a Memory Card
E
Selecting the Drive Mode
You can choose between three drive modes (recording modes).
Continuous Shooting
You can capture a quick series of still images with the continuous shooting function.
1. Set the camcorder to CARD CAMERA mode.
2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], set
it to [CONT. ] and close the menu.
“ ” appears on the screen.
3. Press and hold the PHOTO button to record the still images.
A series of still images will be recorded.
4. Release the PHOTO button to end recording.
❍ Maximum number of continuous shots at one time:
* These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
❍ This function can be assigned to the CSTM KEY ( 53).
❍ The range of the flash decreases in continuous shooting mode. We
recommend recording close to the subject when using the flash.
1632 × 1224 Flash OFF/ON 2 frames 10 images
1280 × 960 Flash OFF 3 frames 10 images
Flash ON 2 frames 10 images
640 × 480 Flash OFF 3 frames 30 images
Flash ON 2 frames 30 images
Still Image Size
Built-in flash
Frames per
Second
Maximum Number
of Continuous Shots
Continuous Captures a quick series of still images while you press
the PHOTO button.
AEB (Auto Exposure Bracketing) Captures a still image in three different exposures
just by pressing the PHOTO button once.
Single Records a single still image when you press the
PHOTO button.
