Additional
Information
111
E
Miscellaneous
• The video heads need cleaning
( 106).
• The video heads need cleaning
( 106).
• The TV/VIDEO selector on the TV
isn’t set to VIDEO ( 30).
• The speaker has been turned off with
the selector dial ( 26).
• Headphones are being used.
? The playback picture is rough
(with mosaic-like noise).
? There’s no picture on the TV
screen, even though the tape is
moving.
? There’s no sound coming from the
speaker during playback.
Cause and/or what to do about it
• The remote sensor mode is set to
OFFB in the menu ( 39).
• The remote sensor modes of the
wireless controller and the camera
itself are different ( 39).
• The batteries are dead or not inserted.
• It is turned off ( 40).
• Check the screen displays ( 117).
• External interference may cause the
camera’s microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.
• Remove the cable and then reconnect
it or turn the power off and back on
again.
• This is not a malfunction.
Problem
? The wireless controller doesn’t
work.
? The tally lamp doesn’t flash.
? The power indicator is flashing.
? The camera malfunctions.
? The DV cable is connected
correctly, but there’s nothing in
the display.
? The camera becomes warm
during use.
#5_OPTURA Pi_E(100-126) 1/25/00 13:43 Page 111 (1,1)
