Chapter 3 Using the Scanner
40
6
Scanning ends.
The Start Scanning (Continue) dialog box appears.
In Semi-Auto mode, the scanner’s Start key switches to the ready state.
7
To scan another image, project the image onto the scanner
screen and click [Continue Scanning]. To stop scanning, click
[Stop Scanning].
In Semi-auto mode, you can continue scanning simply by pressing the Start
key on the scanner. To stop scanning, press the Clear key. The Start Scan-
ning (Continue) dialog box appears and scanning stops.
If you are using the FS Controller III, you can perform continuous scan-
ning from the FS Controller III keyboard. Refer to the FS Controller III
Instructions for details.
8
Check the scanned images.
The [View] menu and Toolbar buttons can be used to check the image.
Fit to width: Matches the image width to the width of the window.
Best Fit: Displays the entire page so that it fits in the window.
Zoom In: Enlarges the image each time it is clicked. Once the image is displayed at 100%
scale, this menu is grayed out and the image cannot be enlarged further.
Zoom Out: Reduces the image each time it is clicked.
Rotate Left: Rotates the image left (counterclockwise) by 90°.
Rotate Right: Rotates the image right (clockwise) by 90°.
Next page: Displays the image on the next page.
(if TIFF is selected as the file format and multiple pages are scanned)
Previous Page: Displays the image on the previous page.
(if TIFF is selected as the file format and multiple pages are scanned)
NOTE
NOTE
