Manuat Sensor Cleaning _
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
Select [Sensor cleaning].
_ Under the [_':] tab, select [Sensor
cleaning], then press <_-_>.
2
,3
Select [Clean manually].
_ Select [Clean manually], then press
<8 > ,
Select [OK].
® Select [OK], then press <_-_>.
_y,,In a moment, the reflex mirror will
Iockup and the shutter will open.
4_ Clean the sensor.
End the cleaning.
® Set the power switch to <OFF>.
F0i the power soureel using AC Adapter Kit ACK-E8 (s0!d Separately)is
recommended.
¢_ fyouuseabattery, makesure t sfu yrecharged fthebatterygrpwth
size:AA/LR6 batterie s is attached, manual senso r cleaning will not be
possible.
187
