LANVIEW LEDs
4-2
The function of the two System Status LEDs, System Management Bus (SMB) and
CPU (Central Processing Unit), are listed in Table 4-1.
The function of the INB Receive LEDs is listed in Table 4-2.
The function of the INB Transmit LEDs is listed in Table 4-3.
Table 4-1. System Status (SMB and CPU) LEDs
LED Color State Description
Green Functional Fully operational
Yellow Testing Power up testing
Yellow (Blinking) Crippled Not fully operational (i.e. one port may be bad)
Yellow/Green Booting Module is performing its boot process
Red Reset Module is resetting
Red (Blinking) Failed Fatal error
Off Power off Module powered off
Table 4-2. INB Receive LEDs
LED Color State
Green Link, no activity, port enabled
Green (Blinking) Link, port disabled
Yellow (Flashing) Link, activity, port enabled (Flashing to steady on indicates rate.)
Red INB fault, (not synchronized with the Monarch)
Off No link, no activity (port enabled)
Table 4-3. INB Transmit LEDs
LED Color State
Green (Flashing) Activity, port enabled (Flashing to steady on indicates rate.)
Yellow (Blinking) Port in standby state
Red INB fault
Off Link (port disabled)
