7F06-02 FDDI SmartSwitch Interface Module User’s Guide 3-1
CHAPTER 3
INSTALLATION/REMOVAL
This chapter contains instructions for unpacking and installing the 7F06-2
Module in the:
• 7C03 MMAC SmartSwitch
• 7C04 Workgroup SmartSwitch
• 7C04-R Workgroup SmartSwitch
Also included in the chapter are instructions for installing the front panel
FPIMs.
3.1 UNPACKING THE 7F06-02 MODULE
Unpack the 7F06-02 Module by using the following steps:
1. Carefully remove the module from the shipping box. (Save the box
and packing materials in the event the module must be reshipped.)
2. Remove the module from the plastic bag. Observe all precautions to
prevent damage from Electrostatic Discharge (ESD).
3. Carefully examine the module and check for damage. If damage
exists, DO NOT install the module; contact Cabletron Systems Global
Call Center.
Before unpacking the 7F06-02 module, attach the antistatic
wrist strap included with the SmartSwitch or SmartSwitch
module by following the instructions printed on the package.
