- 51 -
Advanced Settings
Network Mode - From the drop-down menu, select the wireless standards running on the
network.
If there are Wireless-B, Wireless-G and Wireless-N (2.4GHz) devices on the network, use the
default setting, BGN-Mixed.
If there are Wireless-B and Wireless-G devices on the network, select BG-Mixed.
If there are only Wireless-B devices on the network, select Wireless-B Only.
If there are only Wireless-G devices on the network, select Wireless-G Only.
If there are only Wireless-N (2.4GHz) devices on the network, select Wireless-N Only.
(*)If there are Wireless-A and Wireless-N devices on the network, select AN-Mixed.
(*)If there are Wireless-A, Wireless-B, Wireless-G and Wireless-N (2.4GHz) devices on the
network, use the default setting, ABGN-Mixed.
(*)If there are only Wireless-A devices on the network, select Wireless-A Only.
Radio Band - The settings are available for the Auto-20/40MHz channel and Standard-20 MHz
channel.
Enable WMM (802.1e QoS) - WMM is a wireless Quality of Service feature that improves
quality for audio, video, and voice applications by prioritizing wireless traffic. To use this feature,
the wireless client devices on the network must support Wireless WMM. The default setting is
Enabled. To disable this feature, select Disable.
Click Apply to apply settings or Cancel to cancel changes
