14
Troubleshooting
6 720 606 990
5. Remote will not memorize
desired temperature setting
B Verify that the remote control
"program" button is depressed until
the remote display reads "Pr".
6. Priority " " symbol will not
clear
B Verify no hot water is being used
when trying to clear "priority"
function.
B With no hot water running, press
and hold the “ ” or “ ” button
for 5 seconds on the locked out
device (remote or water heater) until
the " " symbol (Fig. 2, Pos. 6)
disappears.
B Do not use any hot water for at least
5 minutes. The priority function
should automatically clear after this
time period.
i
Memorization of a se-
lected temperature only
saves to the device on
which it was originally
programmed. To re-
trieve a memorized tem-
perature setting, you
must use the device with
which it was pro-
grammed.
6720606990-0701_(Remote control).fm Page 14 Tuesday, January 30, 2007 10:07 AM
