www.bissell.com 800.237.7691
Operations
10
Cleaning your machine continued
2. Rinse the front nozzle of any dirt and
debris.
2a. Remove the portable spot cleaner
from the base of the machine.
2b. Unscrew three screws with Phillips
screw driver and remove nozzle.
2c. Rinse the nozzle out at the faucet.
2d. Place the nozzle back onto the
machine by hooking the tabs into
the holes on the bottom sides of the
machine. Secure with screws.
3. The inside of the end caps can be
wiped out with a clean paper towel,
or, for a more thorough clean, the end
caps can be taken off and rinsed clean.
4. Any loose hair or debris can be pulled
from the brush rolls and thrown away. For
a more thorough clean, follow directions
on page 15 for removal of brush rolls.
Your machine is now ready to be stored.
NOTE: Store cleaner in a protected,
dry area. Since this product uses
water, it must not be stored where
there is a danger of freezing.
Freezing will damage internal
components and void the warranty.
Upright cleaning mode continued
2b.
WARNING:
To reduce the risk of fire,
electric shock or injury unplug
from outlet before servicing.
Tip:
Let all parts dry completely
and replace onto machine.
