A SERVICE OF

logo

Open as PDF
next previous
10
Double N+ Wireless Router
SECTIONS
Table of Contents
1 2 4 5 6 7 8 9 103
KNOWING YOUR ROUTER
K. Connections to Wired Computers
Connect your wired (non-wireless) computers to these ports. These
ports are RJ45, 10/100/1000 auto-negotiation, auto-uplinking ports for
standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1
through 4.
L. USB Port
Plug in your USB storage device here.
M. Connection to Modem
This port is for connection to your cable or DSL modem. Use the cable
that was provided with the modem to connect the modem to this port.
Use of a cable other than the one supplied with the cable modem may
not work properly.
N. Reset Button
The “Reset” button is used in rare cases when the Router may function
improperly. Resetting the Router will restore the Router’s normal
operation while maintaining the programmed settings. You can also
restore the factory default settings by using the “Reset” button. Use the
restore option in instances where you may have forgotten your custom
password.
i. Resetting the Router
Push and release the “Reset” button. The lights on the Router will
momentarily flash. The “Power/Router” light will begin to blink. When
the “Power/Router” light becomes solid again, the reset is complete.
ii. Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds, then
release it. The lights on the Router will momentarily flash. The
“Power/Router” light will begin to blink. When the “Power/Router”
light becomes solid again, the restore is complete.
O. Power Jack – Black
Connect the included 15V/1.25A DC power supply to this jack.
(K)
(L)
(M)
(N)
(O)
P. “Reconnect” Button
The “Reconnect” button provides a
simple way to alleviate wireless and
Internet-connection difficulties. Upon
pushing this button, the Router will
automatically scan and set itself on the
cleanest channel, turn on high-speed
mode (20/40MHz mode), and renegotiate
your connection with your ISP (Internet
Service Provider). Please note that any
devices connected to the Router will be
intermittently disconnected while the
Router performs these tasks.
Common issues that “Reconnect” will fix:
• Sloworinconsistentdownload
speeds due to interferences from other
devices on the 2.4GHz band.
• LostInternetconnection,whichcan
be caused by problems with the ISP or
modem. Please also reset your modem
before using “Reconnect” to regain
connection to your ISP.